• NoEquMessage

Description:        -

Values: T (= yes),  F (= no)

Remark: Value must not be changed


  • FatalErrorWarn

Description:        -

Values: T (= yes),  F (= no)

Remark: Value must not be changed


  • VerkuerzteRohre

Description: Should shortened pipes be supported ?

Values: T (= yes),  F (= no)


  • TStueckSprinkHyd

Description: For the calculation, should tees be created at the connection of the

sprinklers on the line pipe?

Values: T (= yes),  F (= no)


  • BogenAnPumpe

Description:        Should an elbow be created in a node if a pump was entered in this node?

Please place the pump as follows to use the parameter:

Values: T (= yes),  F (= no)


  • PositionTStuecke

Description:        How will be the tees in a node created?

(Description see chapter tees)

Values: 1, 2


  • VorgabeMaßstab

Description:        Default value for the scale of the new project

Values: Integer > 0


  • VorgabeStrangrohr

Description: The option 'Branch pipe' is selected as the default value during sprinkler input.

Werte: T (= yes),  F (= no)


  • BerechnungsergebnisseKorrigieren

Description: Due to the iteration procedure used in the calculation, small inaccuracies may occur in the calculation results.

During correction, the calculated values for pressure loss, water flow and flow velocity are corrected as follows.

If the respective value is smaller than 1/1000 of the maximum value (for pressure loss 1/10000), then this value is set to 0.

Values: T (= yes),  F (= no)